ArchiGreen

Related ArchiGreen^® products

• SedumDrain^® 25

  Extended name of the product: SedumDrain^® 25 mm thick water retention and runoff-delay drainage board

  Specification: ArchiGreen^® SedumDrain^® 25 is a black double-sided water reservoir and multi-directional drainage board with precise 2 mm diffusion openings in the centre of each of the crowns of the studs peaking at the top side of the board. The board is 25 mm in thickness and is made of recycled high impact polystyrene. SedumDrain^® 25 is to be used as a water retention and drainage layer on extensive, semi-intensive and intensive green roofs. This product is CE-marked. Size: 1910x960x25 mm (LxWxH) [EN ISO 9863-1:2005]. Weight: 1.38 kg/m² [EN ISO 9864:2005]. Retention capacity (water): 10.1 litres/m² . Retention capacity (crushed brick infill): 12.2 litres/m² . Maximum load pressure (empty) at 10 % compression: 347 kN/m² [EN ISO 25619-2:2009]. Maximum load pressure (4-8 mm gravel infill) at 10 % compression: > 400 kN/m² [EN ISO 25619-2:2009]. Water discharge capacity at i = 0.01 i.e. at roof slope 1%: 0.80 litres/(m.s); i = 0.02 i.e. at roof slope 2%: 1.40 litres/(m.s); i = 0.03 i.e at roof slope 3%: 1.85 litres/(m.s); and i = 1 i.e. at roof slope 100%: 15.38 litres/(m.s) [EN ISO 12958:2010]. Rate of drainage through perforations under 5 mm permanent water pressure: 0.092 litres/m² [EN ISO 11058:2010]. Microbiological resistance test: Minimum 25 years as per conditions set in the standard [EN 12225:2000]. The drainage performance and the attenuation of stormwater runoff of SedumDrain^® 25 exceeds the requirements set forth in German Building Standard DIN 4095, EN 13252:2000/A1:2005, and the German FLL Guidelines. Delivery and installation is in accordance with manufacturer's instructions.

  Technical data sheet Product images

• FL 150

  Extended name of the product: Filter Layer 150 g/m² geotextile

  Specification: ArchiGreen^® FL 150 is a black separation sheet made of polypropylene. It is primarily used to serve filtration purposes in an extensive green roof build-up where it is rolled out over the drainage layer. This product is CE-marked. Size: 100 x 2 x Ø 0.4 m (L x W x H) [EN ISO 9863]. Weight: 30 kg [EN ISO 9864]. Effective pore size: 0.1 mm [EN ISO 12956]. Static puncture i.e. CBR test: 1.5 kN [EN ISO 12236]. Dynamic perforation test i.e. cone drop test: 20 mm [EN ISO 13433]. Tensile strength warp (MD): 8.5 kN/m; weft (CMD): 8.5 kN/m [EN ISO 10319]. Elongation at break warp (MD): 75 %; weft (CMD): 80 % [EN ISO 10319]. Water permeability normal to the plane - velocity index VI_H50: 90 mm/s [EN ISO 11058]. Microbiological resistance test: Minimum 25 years as per conditions set in the standard [EN 12225:2000]. Filtration performance of the sheet exceeds the requirements set forth in the German FLL Guidelines. Delivery and installation is in accordance with manufacturer's instructions.

  Technical data sheet Product images

• PL 300

  Extended name of the product: Protection Layer 300 g/m² geotextile

  Specification: ArchiGreen^® PL 300 is a multi-coloured protection mat made of rot-proof recycled synthetic staple fibres needled to form a mesh that reserves structural stability and durability. It is primarily used to fulfil protection purposes on an extensive green roof. Size: 50 x 2 x Ø 0.35 m (L x W x H) [EN ISO 9863]. Weight: 30 kg [EN ISO 9864]. Effective pore size: 0.134 mm [EN ISO 12956]. Static puncture i.e. CBR test: 1kN [EN ISO 12236]. Dynamic perforation test i.e. cone drop test: 24 mm [EN ISO 13433]. Tensile strength warp (MD): 2.7 kN/m; weft (CMD): 3.7 kN/m [EN ISO 10319]. Elongation at break warp (MD): 85 %; weft (CMD): 70 % [EN ISO 10319]. Water permeability normal to the plane - velocity index VI_H50: 95 mm/s [EN ISO 11058]. Robustness class: GRK 2. Protection performance of the mat exceeds the requirements set forth in the German FLL Guidelines. Delivery and installation is in accordance with manufacturer's instructions.

  Technical data sheet Product images

• SP AL 120/80

  Extended name of the product: Separation Profile made from Aluminium with interchangeable upright sides of 120 and 80 mm

  Specification: ArchiGreen^® SP AL 120/80 separation profile is an L-shaped metal strip with two applicable upright sides 80 or 120 mm. It is made of aluminium. Lateral perforations are present in a regular pattern of seven adjacent slits seven times along the main fold to facilitate drainage properties. An aluminium connector is included with each strip to join adjacent strips and facilitate their alignment. This separation profile ensures the neat demarcation and proper separation of the gravel strip from the engineered growing medium (substrate) on a green roof. Size: 2000x80x120 mm (LxWxH). Aluminium plate thickness: 1.2 mm. Weight incl. connector: 0.82 kg / 1 linear metre. Connector demands: 1 unit / 2 linear metres. Effective perforation surface on a linear metre: 5145 mm². Delivery and installation is in accordance with manufacturer's instructions.

  Technical data sheet Product images

• IC-P 100

  Extended name of the product: Inspection Chamber - near Parapets, 100 mm high

  Specification: ArchiGreen^® IC-P 100 lockable parapet inspection chamber is made of UV-resistant polypropylene (PP), RAL colour 7032, with a stainless steel filter grille and a durable chrome-plated quarter turn lock made of zinc die casting alloy fitted into its detachable lid. Anti-slip tread pattern marks the surface of the lid. Cant strips and pre-defined cutting lines are to accommodate alternative sizes of fillets when installed on outlets located near the parapet. The grille allows for the inflow of surface water via 1300 mm² perforated area according to German FLL Guidelines. Size and weight including lid: 300 x 300 x 100 mm (L x W x H); 1.83 kg. Two expanded load distribution footprints are fixed to the underside via stainless steel screws (Grade: A2). Fastener fixing standard: German Standard DIN 7505. Delivery and installation is in accordance with manufacturer’s instructions.

  Technical data sheet Product images